Home Care

Injection Grouting Type	Poyurethane
Service Mode	Offline
Site Location	Delhi
Usage/Application	Injection water proofing service
Features	expanding type,solvent free polyurethane liquid chemical grouting material
Viscosity	2 pose at 20 degree c
Mixing Ratio	Two Pack Hydrophobic P.U. A Hydrophobic P.U. B = 101 by volume
cure time	1-2 minutes
Volume expansion	500-600%

PU Injection Grout Chemical is a two component, expanding type,super low viscosity, solvent free polyurethane liquid chemical grouting material which is injected into cracks and voids to immediately stop water infiltration.it quickly expands up to 30 to 40% to form a tough, flexible, closed cell foam which bonds extremely well to concrete. When cured it becomes an extremely effective barrier against water penetration. 
 
KEY FEATURES: 

High volume expansion

Low Viscosity

Permanently flexible

Good adhesion to wet and dry surfaces

Withstands high hydrostatic pressure

Easy to apply

Environmentally safe (cured product is inert)

Impermeable to water

Bridges wide gaps

Economical

ete slabs

Tunnels and dams

Joints in concrete / rocks

Canals

Waste water tanks

Sewers, manholes and utility boxes

Pipe intrusions

Basements

Voids in prefabricated members

Usage/Application	Industrial
Grade Standard	Industrial Grade
Type	Liquid
Chemical Type	Polyurethane
Features	touch,elastic,skid resistant,durable,heat insulating,abrasion resistant,waterproofing protecti
Category	Wall Coating, Floor Coating
Form	Liquid
Drying Time	6-8 hours.
Elongation	Minimum 300%
Flexibility	Highly flexible. Does not crack at all working temperatures
Tensile strength	40 kg sq.cm

Protecto-Ezecoat is a two component, high solids, Polyurethane coating system, which provides touch, elastic, skid resistant, durable, heat insulating, abrasion resistant, waterproofing protection. It forms a thick, seamless and long lasting film and eliminates water seepage from all kinds of surfaces.
APPLICATION: 
The surface is cleaned dried and freed from dust, oil grease, tar and fungus. A base coat of Protecto-Ezecoat 100/Wallgard 10 is applied on all cracks and allowed to dry for 15 minutes and Ezefil crack filling compound is used to fill up the cracks and joints.

Protecto-Ezecoat 100/Wallgard 10 is then applied over the entire surface area and allowed to dry for 4-5 hours. Equal weights of Protecto-Ezecoat 200 and 300 are mixed thoroughly and the mixture is applied by brush over the base coat. The same coat is repeated after 8-12 hours.

After 8-12 hours a topcoat is applied. This topcoat should be mixture of Protecto-Ezecoat 500 & 600 (aliphatic grade) if the coating is to expose to sunlight. If a concrete layer or tiles are to be fixed over the coatings (i.e. no exposure to sunlight) then the topcoat can be a mixture of Protecto-Ezecoat 200 and 300

Brand	IPMC
Usage/Application	Waterproofing
Packaging Size	1 kg
Grade Standard	A
Category	waterproofing

We are a renowned organization, engaged in offering a wide range of Epoxy Flooring Services to our esteemed clients.

Form of Chemical	Liquid
Packaging Size	10kg
Category	Waterproofing Coating
Color	Transparent
Purity	99.99%
Country of Origin	Made in India

We are a renowned organization, engaged in offering a wide range of Epoxy Flooring Services to our esteemed clients.

Form of Chemical	Powder
Usage/Application	Waterproofing Materials
Packaging Size	10kg
Category	Waterproofing Coating
Color	White Crystal
Purity	100%
Country of Origin	Made in India

We are a renowned organization, engaged in offering a wide range of Epoxy Flooring Services to our esteemed clients.

Location/City	Delhi NCR
Waterproofing Type	Provide all type waterproofing
Service Mode	Offline
Water Proofing Material	All Type water proofing material
Service Type	Waterproofing
Brand	Home care
Site Location	Delhi
Coverage Area	Industrial
Usage/Application	Protect building against water damages
Property Type	Commercial, industrial

Minimum order quantity: 1000 sq ft

We are a renowned organization, engaged in offering a wide range of Water Proofing Services to our esteemed clients.The services offered under this profile include crystalline waterproofing services, polymer (cementitious) waterproofing services, injections waterproofing services, membrane waterproofing services and bituminous water proofing services.
These services work to offer enhanced performance against not only positive and negative water pressures, but also osmotic pressure. Our Water Proofing Services are widely used to assure water tightness in water tanks and reservoirs, building basements & foundations, swimming pools and water parks.
Where Waterproofing is required :
Area of application.
Basement- Water Bodies like Pool, Water Tanks, Fountains; Water prone areas like Kitchens, Toilets, Bathrooms, Ducts, Sewer lines ;
Exposed surfaces like External Facade, External sidewalls, Balconies, Roofs, Terraces; special Utilities areas like Steam & sauna rooms, powder rooms, etc

Usage/Application	for waterproffing
Packaging Size	Any
Type	Concrete Admixture
Category	Cementitious Waterproofing
Grade Standard	Industrial Grade
Site Location	Delhi
Property Type	Industrial
Brand	SIKA, Fosroc, CICO

So as to accomplish high level of customer trust, we are keenly betrothed in offering a broad consignment of Waterproofing Chemicals.

Features:

• Accurate composition

• Effectiveness

• Good quality

• Safe to use

Application:

• Waterproofing of floor,rooftop,basement,sunken portion,water tank,swimming pool etc.
• Depression
• Mortar & concrete patch repair
• Maintenance of seepage & leakage
• Tile jointing